足球体育比分
Phone400-615-4535 E-mail[email protected]

技術支持 Technologies

橢偏儀技術

發布者:眺望科技                     發布日期:2018-03-30

he FS-1 uses the power of ellipsometry to optically characterize samples.  In an ellipsometer system, the Polarization State Generator (PSG) emits light with a known polarization, which is obliquely incident on the sample, and the Polarization State Detector (PSD) measures the polarization state of the light reflected from the sample.

1.jpg

The change in polarization state caused by the sample reflection can be defined by the ratio of the sample reflectivity for p-polarized light (Rp), over the sample reflectivity for s-polarized light (Rs).  This ratio is a complex number, which is typically denoted by ρ (rho), and is often reported in terms of the ellipsometric parameters Ψ (Psi) and Δ (Delta), as defined by the following equation.  According to this equation, tan(Ψ) defines the magnitude of the reflectivity ratio for p- and s- polarized light, and Δ defines the phase difference between the reflected p- and s- polarized light.

2.jpg

An alternate representation of the ellipsometric parameters is shown below. The N, C, and S ellipsometric parameters can be calculated in terms of the Ψ (Psi) and Δ (Delta) parameters, assuming the sample is isotropic and non-depolarizing. One of the advantages of the N,C,S representation of the ellipsometric parameters is that if the sample is depolarizing, the degree of polarization P can also be reported.

3.jpg

The ellipsometric parameters measured on the sample (and reported in either the Ψ/Δ or N,C,S representation) can be further analyzed to determine sample properties of interest, such as film thicknesses and optical constants.

 

400-615-4535
400-615-4535
足球体育比分 007即时比分 上海股指配资推荐 2012年足球直播 安徽十一选五 25选7 快播在线观看黄色片 广东26选5 2013上证指数预测 护花小游戏sm捆绑 好运彩3 中国核电股票 同花顺模拟炒股软件 北京pk10 十大期货配资公司排名 股票配资平台哪个安全a贵丰配资 2014世界杯即时指数